قالب وردپرس درنا توس
Home / Tips and Tricks / FlexClip is a good enough alternative to MagSafe for sticking stuff to your phone – Review Geek

FlexClip is a good enough alternative to MagSafe for sticking stuff to your phone – Review Geek



Review:
7/10
?

  • 1 – Absolutely hot waste
  • 2 – Sorta lukewarm waste
  • 3 – Severely flawed design
  • 4 – Some advantages, many disadvantages
  • 5 – Acceptably imperfect
  • 6 – Good enough to buy on sale
  • 7 – Great, but not best in class
  • 8 – Fantastic, with some footnotes
  • 9 – Shut up and take my money
  • 10 – Absolute design Nirvana

Price: $ 15

FlexClip with portable battery
Michael Crider

For me, Apple’s MagSafe mounting system on the iPhone 12 is the biggest phone innovation of 2020. And that’s hard to say as an Android fan. Peak Design is working on a universal mounting system, but FlexClip beat them in the market, with a universal bracket that can be used on anything, which is designed for phones, mounts and accessories.

Here’s what we like

  • Cheap
  • Easy to install
  • Compatible with almost everything

And what we don’t

  • Difficult to pull apart
  • No ready-made mounting options
  • Semi-disposable glue

The FlexClip consists of two parts: a holder and a receiver. Stick the holder on your phone, stick a receiver on everything with a flat edge and you attach them via the plastic rails. More importantly, you can remove and reattach them as often as you like, and the glue on the clip itself can be removed without damaging your phone or (most) cases.

It’s plastic, so it’s inexpensive, and it won’t interfere with NFC or wireless charging (as long as you’re not using a thick cover). And while it’s far less elegant than MagSafe, it doesn’t require a new $ 700 phone to use.

Setting things up

Installing the FlexClip is pretty easy, but you do need to make sure it’s centered for use with whatever you’re gluing it to. (With the small battery attached to the centered FlexClip on my Pixel 3a XL, it covers the fingerprint sensor – my fault for not measuring.) The receiver is just as easy to install and can be placed on anything with a flat surface of about one square inch. You can remove them with strong fingers or a small screwdriver, but the glue is not replaceable. You need a new retainer or receiver if you remove one.

FlexClip mounting and bracket
The wing-shaped clip holds the plate securely. Michael Crider

To test the system, FlexClip sent me a selection of accessories: a small mobile battery (which is designed to stick to the back of a phone anyway), a set of AirPods knock-offs, a finger ring kickstand thing and a small wallet. With the holder installed all of them attach to my phone with ease, although some provide a more natural fit than others. It only takes a firm push to get it in place, and the slightly rounded corners on the plastic subtly help guide the rails correctly.

Earbud pouch attached to the phone with FlexClip
Michael Crider

Once connected, the two parts don’t accidentally fall apart. When I tried to pull them apart, I found that the ultra-tacky adhesive was coming off the plastic instead. It would certainly be possible to take them apart that way, but it should be hit so hard that you could also damage your phone.

A hard jerk

The FlexClip holder and receiver add about a quarter of an inch to the combined thickness of your two items. Sliding the system apart to loosen it is a lot more difficult than putting it together in the first place: I’d say it takes about 5-10 pounds of pressure. I was worried that repeated loading of the plastic would crack it, but I haven’t seen that happen in dozens of test sessions. (And even if it does … these things are cheap enough to be semi-disposable, a la the Pop Socket.)

FlexClip with telephone ring
Michael Crider

Note that the pressure required to take them apart can be difficult for small children or those struggling with arthritis. The retainer round pliers seem to grip the plate quite hard and you will have to practice a few times to set the optimal amount of pressure to apply.

FlexClip on the back of a Pixel phone
Correct placement of the plate for your accessories is essential. Michael Crider

Swapping in and out pieces was easy once I knew roughly where the point of release was. And again, despite feeling like the plastic was fragile, it never really cracked while I tested it. I’ve never had the confidence to use the FlexClip system with my actual wallet (or rather, the usual contents), but I would be more than comfortable trusting it to include a spare battery or Pop Socket.

Bring your own

The bigger problem I can see with FlexClip as a low-cost alternative to MagSafe is that it relies on the existing device accessories market, rather than offering it itself. If you want to use FlexClip with brackets on your desk or in your car, you need to attach it to a bracket you already have: there is no FlexClip AC vent mount or dashboard adapter. As cheap as the clips are, that’s not ideal, and the force required to remove the clips won’t make it anywhere as smooth as the magnetic mount already available on many third-party mounts, or the simple retractable mounts that Pop Socket Markets.

Flex clip attached to phone, battery, phone ring, headphones and wallet
Michael Crider

I still hope that Android device and accessory manufacturers will figure out a way to make phones MagSafe compatible, and that accessories designed for specific phones and applications like ZeroLemon’s battery boosting cases are a more elegant solution to most problems that fixes FlexClip. . But if you want a small, inexpensive, and mostly unobtrusive way of sticking stuff to your phone (or sticking your phone on it) then it will work. FlexClip does what it says on the box.

FlexClip is available for pre-order on its website for $ 15 (with a 20% off promotion at the time of writing). Reps told me it will be on sale on Amazon and Walmart starting January, with a wider rollout to follow.

Here’s what we like

  • Cheap
  • Easy to install
  • Compatible with almost everything

And what we don’t

  • Difficult to pull apart
  • No ready-made mounting options
  • Semi-disposable glue




Source link