قالب وردپرس درنا توس
Home / Tips and Tricks / How to keep energy saving mode on your iPhone indefinitely «iOS & iPhone :: Gadgethacks

How to keep energy saving mode on your iPhone indefinitely «iOS & iPhone :: Gadgethacks



The energy saving mode (LPM) reduces the amount of battery your iPhone uses by refreshing the background app and automatic downloads, locking your screen after 30 seconds and more. Although it is only meant to be used temporarily, you may want to permanently enable LPM if you have problems with the battery life.

With iOS 1

3, you can create personal automation (actions that are automatically performed by different triggers) in the Shortcuts app to leave the power save mode on permanently. By default, LPM is automatically disabled when you charge your iPhone to 80% or higher, but usually for good reason. Although you can save battery life, many functions can take longer to complete or even not work at all if LPM is always on. But as long as you are good at that, you can use LPM at any time as follows.

Step 1: Create a personal automation in shortcuts

First open the Shortcuts app and tap the "Automation" tab at the bottom of the screen. Now you have to choose a trigger: in this case we want "Low Power Mode". On the next page, tap & # 39; Is disabled & # 39 ;. This means that the trigger for your personal automation is that LPM is switched off. Press "Next".

Now you need an action that is performed automatically when the trigger condition is met. Tap "Add Action" and then type Low Power Mode in the search bar that appears and choose "Set Low Power Mode" from the results. The action is automatically set to "On", so you don't have to change it. Press "Next" when done.

Your new personal automation is almost complete, but we want to make it fully automatic. To do that, you must disable "Ask before executing". In this way, when the trigger condition is met (i.e., when LPM is off), you do not have to manually confirm to perform the action. Instead it will happen in the background. If you disable "Ask before running", you must also tap "Do not ask". To complete the creation of the shortcut, press "Done" at the top right.

Step 2: Test your personal automation

Now that your new personal automation shortcut has been completed, it is time to test it. If you follow it closely, personal automation works as follows: when the energy-saving mode is switched off, it is automatically switched on again.

Simple right? To test it, switch the power saving mode on and then off (you can easily do this from the Control Center). If the shortcut works, the energy-saving mode is automatically switched on again, indicated by a message from the shortcut app (GIF below).

Switching off permanent LPM

You may not want the personal automation of the Low Power Mode to be used indefinitely time on your device, so you can turn it off or delete it.

First you can simply turn off the shortcut. To do this, tap it on the Automation of the Shortcuts app and disable "Enable this automation"

Alternatively, you can permanently delete the shortcut. To do this, swipe left on the Automation tab and tap & # 39; Delete & # 39;

This article was produced during the annual Tweaks & Hacks celebration week from Gadget Hacks. Read all Tweaks & Hacks Celebration stories.

Don't miss it: Bypass Paywalls in Safari to read every article on your iPhone

Cover photo and screenshots by Nelson Aguilar / Gadget Hacks [19659024]
Source link