قالب وردپرس درنا توس
Home / Tips and Tricks / Mount your Google Home Mini or Nest Mini on the wall: better sound and a cleaner appearance

Mount your Google Home Mini or Nest Mini on the wall: better sound and a cleaner appearance



  google-home-nest-mini-1493

This Google Home Mini is mounted in a bathroom, far above the splash zone.


Dale Smith / CNET

What is small and round ̵

1; not to mention smart – and works better if it is attached to a wall? If you have answered your Google Home Mini or Nest Mini ($ 35 at Walmart) congratulations! Most people get their new smart Google speaker from the cupboard and place it immediately on a table or counter. But consider mounting it on the wall. It will help your Mini sound better, probably hear you better and probably won't collect as much dust and dirt as it doesn't mess up your kitchen counter, side table or bedside table.

I spent a week drilling, nailing – and in one case even duct tape – five Google Home and Nest Minis on the wall to find out which are the easiest, most robust and, of course, most beautiful techniques to mount your Mini on. the wall.

The new Nest Mini has a built-in notch at the bottom, making the latest entry-level speaker from Google a bit easier to hang than the previous-generation Google Home Mini. That said, there are a lot of other good, bad and certainly ugly ways to get your Mini off the table top.

CNET Associate Editor Molly Price has a great guide to wall mounting the Nest Mini that served as my starting point. From there, I let imagination and the old-fashioned DIY spirit lead the way. Read on to see how you absolutely should not try to mount your Mini on the wall, and what worked well for me, including some aftermarket adapters that you can get for $ 15 or less.

The safest and nicest ways to mount your Google Home Mini speaker

  img-1215 "height =" 0 "width =" 370 "data-original =" https://cnet3.cbsistatic.com/ img / L5Jhk8tvxj2RUPXFOnk8vTOdiAI = / 370x0 / 2020/01/15/34932737-d2d4-4cdb-8c53-e2586292c6ab / img-1428.jpg

blue Mini rear the bank hid most of the smart speaker power cable.


Dale Smith / CNET

Google has a built-in notch for the wall mounting of the Nest Mini, so you don't need extra hardware if you have the latest generation of smart speakers from Google.

The advantage of this method is that you can do it within five minutes without purchasing additional hardware. The disadvantage is that it is difficult to hide the rather obvious power cord that protrudes from the bottom. Google's official instructions for mounting your Mini on the wall split it into three basic steps:

1. Choose a location close to a power outlet.

2. Drill a screw into the wall, using a wall anchor if necessary.

3. Hang it up.

You can avoid using a wall anchor by placing a wooden pin behind the plasterboard and drilling a screw directly into it. I used the CH Hanson Magnetic Stud Finder ($ 7 on Amazon) to hang my new sky-blue Nest Mini in my living room, with the back of my couch covering most of the power cord.

  img-1231 "data-original =" https://cnet1.cbsistatic.com/img/ZwAf4OsYeCOk3ru60C2Wfo9A72M=/2020/01/03/f771e998-561e-4eae-8160-0342b15d2f1c/img-1231.jpg cialis196590.jpg] img-1231

The Dot Genie backpack adapter for Google Home Mini uses a wall socket to mount the speaker on the wall, which works particularly well in the kitchen where there are usually sockets directly above the kitchen counter.


Dale Smith / CNET

Buy brackets, wall brackets, or other types of aftermarket accessories

  img-1418 "height =" 0 "width =" 370 "data-original =" https://cnet1.cbsistatic.com/img/kpdIRQW2LdcNPjiBqH0k1S20EEw= / 370x0 / 2020/01/15 / 301d2771-f153-4a4a-8cfa-aaf5bb7a5cb1 / img-1418-2.jpg cialis19659027 {img-1418 "height =" 0 "width =" 370

This Google Home Mini-wall – mounting clip from FStop Labs costs $ 10 for a two-pack on Amazon and is just about the lowest profile clip available for the Mini.


Dale Smith / CNET

There are dozens of third-party accessories that you can use to mount your notchless Google Home Mini (and the Nest Mini on the wall if you want an alternative to the included notch) that cost around $ 5 to $ 15. The Google Store has only one option for $ 15, the Incipio Wall Mount for Google Home Mini, but Amazon is full of choices, just like eBay. Most supports fit into one of three categories:

Clip Brackets : These are small plastic brackets that are attached to the wall with screws and hold the Mini to hold it in place. The Incipio Wall Mount ($ 15 in the Google Store) is an example, but I went with a cheaper, almost identical clip from FStop Labs ($ 10 for two at Amazon). The same advantages and disadvantages as mounting with the notch from Nest Mini.


Outlet adapters : My favorite outlet adapter is the Dot Genie Google Home Mini Backpack ($ 13 on Amazon). Unlike other similar products that wrap the regular power cable of the Mini speaker in an ugly coil, the Dot Genie comes with its own adapter, making the speaker more flat against the wall. That means no cable is in sight.


Wall brackets with cable management : In principle you walk the power cable behind the plasterboard and remove it again next to a socket. The Mount Genie ($ 14 at Amazon) is a perfect example. My lease is about to expire soon and I would rather not have to repair any walls before moving, but if you own your home and are not afraid to perform a minor operation, this is the cleanest, most professional way to go – especially if you don't want to use a couch or other furniture to hide the cord.

  img-1425 "height =" 0 "width =" 270 "data-original =" https://cnet4.cbsistatic.com / img / ISF9Y2A7USrJQU2qc-F1gBu8NBQ = / 270x0 / 2020/01/15 / e1cb6195-4cd3 -4a02-a976-6f90e7d1672b / focus-mode-1-phone-square.jpg cialis19659035 {img-1425 "height =" 0 "width =" 270

Volume control is reversed on your wall-mounted Mini unless you enable this setting to fix it.


Screenshot by Dale Smith / CNET

One last step: change this setting

Congratulations – you have your Mini speaker on the wall where it belongs! There is another step to make it perfect.

After mounting your Mini to the wall, the touch volume buttons on the speaker itself are the opposite of what you're used to, so you want to go in and change them to the more natural direction of the volume at the bottom left, right up . This is how:

1. Open the Google Home app and tap the Mini icon .

2. Tap Settings (the gear icon ) in the upper right corner.

3. Scroll down to the option Reverse device control and switch it on in .

Now that I know how to best mount your Google Home or Nest Mini, let me try to talk to you about making some of the same mistakes that I (intentionally) made while researching how I could do this.

  img-1229-2 "data-original =" https://cnet3.cbsistatic.com/img/jiy2YwQzUY4VWEnkkrc_pzoF79I=/2020/01/02/0c94455a-6726-4095-916e-58d27addc24f/img-1229-2 .jpg

Heavy-duty black Gorilla duct tape can hold a Google Home Mini against the wall – apparently indefinitely – but unless Junkyard Wars inspires your design language, stick to more aesthetic ways to smart speaker.


Dale Smith / CNET

Definitely do not attach your Google Home Mini or Nest Mini like this

  img-1238 "height =" 0 "width =" 370 "data-original =" https://cnet3.cbsistatic.com/img/ 2j2 -D9Rou8p9PEOGDJtHJBFjCYA = / 370x0 / 2020/01/15 / da949413-3838-43e1-8d61-1f989b5baef5 / img-1238.jpg

Not only a pin that doesn't feel firm when holding a Nest Mini, it pushes the speaker off the wall and looks MacGyvered in a bad way.

Whatever version of the Mini you have, there are some wall-mounting methods that seem obvious and simple, but failed when I tried them. Save yourself the grief of a falling speaker and a useless hole in the wall and try none of these.

Pushpin : Yes, it will work technically, but after a nasty afternoon of closing doors extra softly and my music won't play loud enough to enjoy it for fear of the Mini vibrating off the wall, I knocked him down. Plus the Mini just dangles on the wall – all shabby and not chic.

Nagel : Same deal as with a thumbtack, only he leaves a bigger gap. If you want to put real hardware in your wall, choose one of the methods below.

Command Hooks : Although Command Hooks ($ 7 for eight hooks with a maximum capacity of 1 pound on Amazon) is technically successful, they are a bit awkward and the speaker doesn't feel safe with it . The base of the hook protrudes above the speaker and the hook pushes the Mini so far away from the wall that it does not even touch.

  img-1251 "data-original =" https://cnet1.cbsistatic.com/img/pyadb2jpmuHW-rKKtc-9O19aFIg=/2020/01/03/0c83331b-d28a-4c7d-b57e-2b0952c47a8d/img-1251 .jpg

A command hook with a maximum capacity of 1 pound can work if you don't mind an aesthetic style in the utility room.


Dale Smith / CNET

Double-sided foam tape : I actually thought this would be the best hack for mounting a Mini on the tiled rear wall of my kitchen, but the 3M mounting tape I used just refused. to stay. non-slip base. I even tried to cover the entire base in tape, hoping that extra surface would solve the problem, but no dice.

Duct tape : Unless you opt for a sort of post-apocalyptic survivalist aesthetic, heavy black Gorilla duct tape ($ 8 at Amazon) just looks horrible no matter how you hold it. View the photo above if you are not convinced.

Now that you know how (and how not ) your speakers should be mounted, you can place them in any room and an audio system for the entire house with Google Home . Or, if you are still new to Google Home, learn how to get the most out of these 32 Google Home tips and tricks . Ready to take the next step in your personal smart home adventure? Adding a Nest Hub or Nest Hub Max smart display to your Google Home configuration may be your next best move.


Source link